STEERING DAMPER MOUNTING KIT. KAWASAKI ZZR1400 ZX-14. MK-KA14-T001 INSTALLATION INSTRUCTIONS for.

Steering Dampers Your bike reacts the way you’d hope for. A steering damper, or steering stabilizer is a damping device designed to inhibit an undesirable, uncontrolled movement or oscillation of a vehicle steering mechanism, a phenomenon known in motorcycling as wobble. Motorcycles with a short wheelbase and an aggressive steering geometry provides the ability to make very quick changes in direction. As a side-effect it the bike is less stable, gives less feedback from uneven road surfaces, and is more difficult to control. If the front wheel is not completely inline from the direction of travel when it touches down after a small wheelie, it may cause an unwanted wobble. Steering dampers are factory installed on more and more high-end motorcycles, not only sport, but also naked and big all-roads.

This is to counter these undesirable behaviour. Steering dampers offer comfort and safety.and Hyperpro offers the best! A Hyperpro steering damper reduces this kind of risk to a bare minimum. These wobbles - Tank-slappers - and vibrations are intercepted by the damper. As a result, you have a bike that steers the way you want and reacts the way you’d hope for in unexpected circumstances.

The Hyperpro Steering Damper program is divided into 2 levels; the CSC (Constant Safety Control) steering damper and the RSC (Reactive Safety Control) steering damper. Both steering damper types are made with the highest precision to guarantee the quality and functioning of the steering damper. This one is unique of it's kind and is superior to other steering dampers.

It behaves like a linear steering damper, while normal riding and it has all the functionalities of the CSC steering damper. However, when it comes to the real job, like tank slappers and wobbling, whereas the CSC steering damper will control the very quick movements, the RSC will react in a direct way with a lot of extra progressive damping to even-out and cancel the quick movement at the very beginning.

This will give you the real support that you need. As we say: “the best steering damper in the world!”. Hyperpro develops mounting kits to mount a steering damper to the bike. Plug and play, so in 98% of the applications it is possible to mount the kit without drilling or cutting in the motorcycle. We prefer to design a mounting kit in the toptank position, so it is possible to see the steering damper and makes it more easy to adjust. Mounting kits are available in the colors Hyperpro Gold or Black. If your bike is not in our application list, a wide range of clamps and brackets are available to mount onto the bike yourself.

All parts are developed, designed, manufactured and assembled in our own factory!

Foxconn drivers for windows 10. A post from another thread. I think you can buy 'kits' for installation but with a little ingenuity it's pretty easy to jury rig a functional bracket set up. One I rigged: My fork already had a heim joint and I had to rig up a bracket to the sidecar mount. I was a little concerned of the angle I ended up with but it works fine. (excuse the grasshopper massacre) I used a $20-something odd dollar VW damper. The rod end had an angle as stock and it fit well. I used a nylon lock nut on the lower mount and left it loose enough to allow the cylinder to pivot as needed.